CardioChek PA 40ul Cappillary (16 collectors)
Used with CardioCheck kits and CardioChek PA

Instructions:

1. FILLING

DO NOT SQUEEZE FILLS AUTOMATICALLY

• Stick finger with lancet to obtain a drop of blood.
• Hold pipet up to the blood drop (see picture) and touch the pipet tip to the blood drop.
• The blood will flow up to the line and stop. Keep filling until filled to the line.

NOTE: If the pipet is not filled to the fill line, it will not dispense.

2. DISPENSING

To dispense the blood onto the test strip:

• Place the test strip so that the ribbed side is facing up. Line up the tip of the blood-filled pipet with the white reaction circle on the ribbed side of the test strip.
• Hold pipet above the white reaction circle and squeeze firmly to dispense the entire drop of blood (see picture). Do not touch tip to test strip. Note: If the drop will not dispense, place your finger over the air vent while squeezing.

NOTE: The pipet may be helpful in collecting and dispensing blood. A pipet is required when testing with multi-test strips. However, pipets are not required to test with single result test strips.

- Use 40 ul capillary blood collectors with 3-panel test strips
- Use 30 ul capillary blood collectors with 2-panel test strips
- Use 15 ul capillary blood collectors with single-panel test strips